Random good picture Not show

1. Pin hole bolt ruptures under its service.

2. There is a pin hole between outside shell and output axis.

3. A new machining principle for non-cylinder pin hole of piston was presented by using giant magnetostrictive material (GMM) to control the deformation of tool rod.

4. Using a special pin hole in design will be an effective method to change stress concentration on inside of piston, improve safety coefficient of skirt ...

5. Flux Corrosion is typified by pin hole leaks, generally in the bottom of a horizontal line.

6. The third step, the cable soldered to the pin hole soldering.

7. One such crack formed on the net section at the pin hole, much like an eyebar failure.

8. The NC boring lathe equipped with this kind of deformable arm can bore special shaped pin hole for piston efficiently, and meanwhile meet the demand of micro meter accuracy.

9. A semi elliptic and flaky brachium part with a pin hole is welded on the connecting position between the rod-shaped folding arm and the hanging bar.

10. One pin is arranged at the cross superposition part of the linking guide rod and the operating handle. The pin is matched with a pin hole on the operating handle.

11. Main complications were burn in surrounding organs ( 4 cases ) and pin hole metastasis ( 3 cases ).sentencedict.com/pin hole.html

12. The safety pin can penetrate a safety pin guide pore plate and insert the pin hole of the fixed pore plate of the safety pin.

13. The Si-Mn steel track plate and pin usually exist the early abrasion, one of the main reasons is the burr defect of pin hole.

14. So I told her to get a paper clip, straighten and insert it to the pin hole.

15. The utility model discloses a burner used for quenching in hole, in particular suitable for quenching the partial surface flame in pin hole at hook tail of hook of the train.

16. It is suggested to adopt high-strength steel for the ear plate of the anchorage zone and to locally strengthen the circumambience of the pin hole.

17. Forced fitting experiments are conducted on LY 12 CZ aluminum sheet with pin hole forced fitting.

18. The paper analyses the necessity for piston in modern auto to adopt non circular pin hole.

19. The control and real - time feedback of boring cutter's radial micro - displacement, is the key on the machining process for non - circular pin hole of piston, and also difficulty.

20. In 3D visual inspection applications, there usually exists a distortion error of the CCD cameras pin hole image of ellipse center.